Great bar, love the new sleeve design, and it has the perfect amount of knurling and whip.

The Riot Deadlift Bar is engineered to maximize pulling performance. The 27 mm shaft increases whip, allowing the bar to bend under load so lifters can pull slack before the plates leave the floor. Aggressive 1.5 mm knurling ensures a secure grip even during maximal deadlift attempts. Like every bar in the Riot range, it was designed in-house, including the wide, sword-and-torch-inspired sleeve collar shared with the Squat Bar.
Part of the in-house design is the sleeve collar: an angled, faceted shape that reads as an Olympic torch from one side and a blade from the other. On the squat and deadlift bars it's at its widest, tapering down through the weightlifting and hybrid bars to its slimmest on the power bars.
The shaft is finished in black chrome and the sleeves in QPQ (Quench-Polish-Quench), a black nitrocarburizing treatment, two different coatings chosen for two different jobs. Black chrome on the shaft is thin and hard enough to preserve the aggressive 1.5mm knurling almost as sharply as it was cut, giving a secure hold on maximal pulls. QPQ on the sleeves is exceptionally resistant to wear and corrosion, so the sleeves keep spinning smoothly even after the sleeve-on-shaft contact takes repeated punishment from loading, dropping, and reloading plates.
Rotation comes from graphite-infused bronze bushings rather than needle bearings. In practice, that's a solid bronze sleeve bearing with graphite particles embedded directly into the metal, acting as a permanent, built-in lubricant that can't dry out, wash out, or need re-greasing. It lubricates itself for the working life of the bar. The slower rotation of the bushings keeps the sleeves composed under load. As the bar flexes through the first pull, the plates remain more settled instead of adding unnecessary movement to the lift.
At 27 mm, this is the thinnest shaft in the Riot range, and that's a fully intentional design choice. The shaft's stiffness against bending falls off steeply as diameter decreases, so even a few millimetres of extra thinness make a disproportionately large difference in how much a bar flexes under load. On a deadlift bar, the so-called "Whip" works in your favour: as you set up and begin to pull, the thin shaft bends and stores energy, taking the slack out of the bar before the plates actually leave the floor, and can help carry momentum through as the bar straightens back out during the pull. It's the opposite design goal to the Squat Bar, where whip is engineered out rather than in.
Every Riot bar carries the same identification system: its name, weight, and shaft diameter are laser-engraved on the inside face of the sleeve collar, so the specs stay legible for the bar's whole life no matter how it's stored. The blue end cap identifies this as a 20 kg bar, with the weight printed clearly for quick selection on a busy gym floor.
| Specification | Details |
|---|---|
| Design | In-house design |
| Product type | Deadlift bar |
| Shaft finish | Black chrome |
| Sleeve finish | QPQ black |
| Shaft diameter | 27 mm |
| Length | 230 cm |
| Sleeve diameter | 50 mm |
| Weight | 20 kg |
| Weight tolerance | ±1% |
| Knurling | 1.5 mm aggressive, no center knurl |
| Markings | 81 cm |
| Rotation | Graphite-infused bronze bushings |
| Max load recommendation | 680 kg |
| End caps | Blue (20 kg colour code) |
Why is a deadlift bar more flexible than a power bar?
The thinner 27mm shaft is designed to flex more under load, creating slack that lifters can pull out before the plates leave the floor, this can help with speed off the floor and an easier lockout on maximal pulls.
Can I use this bar for squats or bench press?
It's built specifically for deadlifts. The increased whip that helps your pull makes it unsuitable and unstable for squats or bench press, use a power bar for those lifts.
Why the aggressive 1.5mm knurling?
Maximal deadlifts put huge grip demands on your hands. The aggressive knurl (with no center knurl, since it's not needed on a pulling-only bar) gives a secure hold even on your heaviest attempts.
What's the QPQ coating on the sleeves?
QPQ (Quench-Polish-Quench) is a black nitrocarburizing treatment that's extremely hard-wearing and corrosion-resistant, keeping the sleeves spinning smoothly under heavy, repeated loading.
Is this bar suitable for competition?
It follows deadlift-only competition specs used by federations that allow specialist deadlift bars — check your specific federation's equipment list before competing with it.
What's laser-engraved on this bar, and where?
The name, weight, and shaft diameter are laser-engraved on the inside face of the sleeve collar, so they stay legible for the bar's whole life. The end cap repeats the weight and is colour-coded blue for this 20kg bar.
Why does the sleeve collar look like that?
It's part of Riot's in-house design language: the angled, faceted collar is drawn to suggest both an Olympic torch and a double-edged sword. This bar has the widest collar in the range, shared with the Squat Bar.


Strength Shop 7mm Inferno Neoprene Knee Sleeves - Black - IPF Approved (Pair)
Black Lever Belt, 10mm - IPF Approved
Stealth Black Wrist Wraps – Medium, 30cm/60cm or 90cm, IPF Approved
Black Deadlift / Weightlifting Socks
Training Backpack V2, Black - Add Extra Patches
Premium Latex Resistance Bands, 104CM
7mm Inferno PRO Knee Sleeves - Extra Stiff Neoprene, Stealth - IPF Approved
Black Singlet, Unisex – IPF Approved
Stealth Black PRO Lifting Straps, 50cm or 65cm
Strength Wear Logo T-Shirt V3 – Chikara
Captains of Crush Hand Grippers
Black Grippers 100-300lbs (45-136Kg)
Velcro Patches For Backpacks & Training-Vests
Double Prong Belt, All Black, 10MM - IPF Approved
Strength Shop Deadlift Wedge Black
Black Lever Belt, 13mm - IPF Approved
Riot Black Lever Buckle - Lifetime Warranty
Riot Deadlift Slippers - IPF Legal
7mm Inferno Neoprene Knee Sleeves, Dark Camo - IPF Approved (Pair)
Embossed Black Lever Belt, 13mm - IPF Approved
Olympic Spring Collars - 1 Pair
Strength Shop Original Weightlifting Shoes, White
Double Prong Buckle Belt with Grip, 13MM - IPF Approved
Strength Shop 7mm Inferno Neoprene Elbow Sleeves - Black (Pair)
Inferno Heavy Duty Webbing Lifting Straps - Nylon
Dark Camo Lever Belt, 10mm - IPF Approved
Double Prong Belt, All Black, 13MM - IPF Approved
Narrow 7.6cm Black Lever Belt, 10mm - IPF Approved
Black Wrist Wraps, Light - 30cm/60cm
Double Prong Belt, Wine Red Colour, 10MM - IPF Approved
Olympic Spring Collars, With Rubber Coated Handles - 1 Pair
Black w/ Purple Stitching Lever Belt, 10mm - IPF Approved
Medium Wrist Wraps - Dark Camo print - IPF Approved – 30cm/60cm
Wine-Red Lever Belt, 10mm - IPF Approved
Heavy Duty Extra Long Lifting Straps - Cotton
Purple Lever Belt, 10mm - IPF Approved
Single Prong Buckle belt, All Black, 13MM - IPF Approved
Double Ply Knee Sleeves, Black
Strength Shop 5mm Neoprene Knee Sleeves - Black (Pair)
Single Prong Belt, 10mm, Black IPF Approved
7mm Inferno Neoprene Knee Sleeves, Grey – IPF Approved (Pair)
Weightlifting Double Prong Buckle Tapered Belt, Black - 8MM
Light Wrist Wraps - Dark Leo Print – 30cm/60cm
Pink Lever Belt, 10mm - IPF Approved
CHF 36.00 Incl. Tax
CHF 30.25 Excl. Tax
