Riot MRR | Knurled Thumb Nut – Magnetic Threaded Locking Pin for 75 mm Uprights

Original price CHF 19.00 - Original price CHF 19.00
Original price CHF 0.00
CHF 19.00
CHF 17.59 Excl. Tax Final price varies by tax rate.
CHF 17.59 - CHF 17.59 Final price varies by tax rate.
Current price CHF 17.59 Excl. Tax Final price varies by tax rate.
Tax included
SKU: MRR-KNURLED-THUMB-NUT-SET

A standard pin holds an attachment in place. The Riot MRR Knurled Thumb Nut clamps it. Slide the Ø16 mm pin through your attachment and the 75 mm upright, spin the knurled thumb nut onto the thread at the back and tighten it by hand. The attachment is pulled firmly against the upright – no rattling, no play, no shifting between sets. 

Rock-solid attachments. Especially on attachments you sit on, lean into or push against, a little play quickly becomes noticeable. Take the seat pad on the Riot Low Profile Functional Trainer: with the thumb nut set, it sits tight against the upright, so you can focus fully on your rows, presses and curls. The same goes for other attachments mounted on a Riot MRR 75 mm upright.

Magnetic thumb nut. The inner face of the thumb nut is magnetic. It snaps onto the steel upright, stays in place while you thread it on and doesn't fall to the floor when you loosen it. Between sessions, you can simply park it on your rack.

Tool-free and quick. The large Ø40 mm knurled heads give you plenty of grip, even with chalky hands. Tightening and loosening take seconds – ideal when you switch attachments or heights during your session.

Premium materials. The pin is hard chrome plated for a smooth, durable surface that slides easily through the upright holes. Both knurled heads are made of aluminium with a black oxide finish – lightweight, grippy and a clean match for your black Riot rack.

Built for MRR 75. The pin is designed exclusively for Riot MRR 75 mm uprights. The thread sits at the end of the pin, so on 60 mm uprights the nut cannot reach far enough to clamp. If you train on Riot MRR 60, this pin is not compatible.

Safety note: Tighten the thumb nut by hand only – firmly, but without tools. Overtightening can damage the coating of your rack. Always check that the nut is fully seated before you load the attachment.

Key Highlights

  • Clamps attachments firmly to Riot MRR 75 mm uprights – no play, no rattling
  • Magnetic thumb nut – sticks to the upright, won't get lost
  • Hard chrome Ø16 mm pin with 20 mm thread
  • Knurled Ø40 mm aluminium heads with black oxide finish – tool-free, secure grip
  • Clamping range up to 102 mm
  • Sold as singles
  • Compatible with Riot MRR 75 mm uprights only (not MRR 60)

Specifications

Compatibility Riot MRR 75 mm uprights (not compatible with MRR 60)
Total length 150 mm
Pin diameter 16 mm
Head / nut diameter 40 mm
Thread length 20 mm
Max. clamping range 102 mm
Pin Steel, hard chrome plated
Heads Aluminium, knurled, black oxide finish
Magnetic Yes, inner face of the thumb nut
Weight approx. 346 g per piece
In the box 1 Knurled Thumb Nut pin

Use Cases

  • Locking the seat pad on the Riot Low Profile Functional Trainer for seated rows, presses and curls
  • Securing pads and attachments you push or lean against
  • Reducing play on any attachment mounted on a Riot MRR 75 mm upright

FAQ

What is the difference to a normal rack pin?

A normal pin only holds the attachment in place. The thumb nut set clamps it against the upright, so there is no play.

Does it fit Riot MRR 60 uprights?

No. The thread is at the end of the pin, so on 60 mm uprights the nut cannot reach far enough to clamp. The set is for MRR 75 only.

What is the magnet for?

The inner face of the thumb nut is magnetic. It holds onto the steel upright, so the nut doesn't drop when you loosen it and you can park it on your rack.

Do I need tools?

No. The large knurled nut is tightened and loosened by hand.

How tight should I tighten it?

Firmly by hand, never with tools. Overtightening can damage the coating of your rack.

How many pins are included?

This item is sold as a single item, not a set.